UES DSLR Camera Sensor & Lens Cleaning Travel Kit - Professional APS-C & Mirrorless Camera Cleaning Tools for Travel & Outdoor Photography

UES DSLR Camera Sensor and Lens Cleaning Travel Kit: APS-C Sensor Cleaning Swab, Cleaner, Air Blower, Microfiber Cloth, Lens Cleaning Pen, Lens PaperUES APS-C camera cleaning kit includes all the professional tools that you would need for cleaning your cameras. All the tools are stored safely and neatly in a waterproof hard case. The tools in this kit have wide applications that could be used to safely clean the camera sensor, lens, VR headset lens, phone or tablet screens, eyeglasses, sunglasses, binoculars, laptop, and LED LCD monitors. UES APS-C Camera Cleaning Kit Package Content: Lens and Sensor Cleaner 30ml, APS-C Sensor Cleaning Swab x 10, Microfiber Lens Cleaning Cloth x 5, Lens Cleaning Pen x 1, Air Blower x 1, Lens Cleaning Tissue Book (50 Sheets), Micro Suede Screen Cleaning Cloth x 1 Waterproof Carrying Case Sensor Cleaning Instruction: 1. Before start, shoot a piece of white paper with Aperture Priority (A) mode set at f/22 or higher. On the photo, you could identify where the dust is located on your sensor. 2. For DSLR reflex cameras, make sure your camera’s battery is 100% fully charged. Set camera to sensor cleaning mode, so the delicate shutter and mirror mechanisms stay out of the way, and allow you to access the sensor. This step does not apply to mirrorless cameras. 3. Use an air blower to remove loose dust from the sensor. 4. Open one end of the swab package and remove the swab. 5. Spray the cleaner onto the swab head. 6. Hold the handle at a 60◦ angle, off the surface of the sensor. 7. Swipe the swab from one end of the sensor to the other end with a single constant motion. 8. Turn the swab 180◦ and use the clean side of the swab to swipe the sensor in the same direction again with a single constant motion. 9. Take out an unused dry swab and reperform steps 6 to 8 above to absorb any residual cleaner. 10. Discard the used swabs and never reuse the same swab on any other sensors.UES APSC-16 DSLR or SLR Digital Camera Cleaning Kit for APS-C Type Sensors (14 X 16mm Sensor Cleaning Swabs + 15ml Sensor Cleaner)…UES APSC-16 sensor cleaning swab is specially design for APS-C type 16mm sensors. It is compatible with, but not limited to the following cameras: • Canon: EOS Rebel T3, T3I, T5; EOS 50D, 60D, 70D, 80D • Nikon: D3000 - D3300, D5000 - D5500, D7000 - D7200, D40 - D90 • Sony: NEX3 - NEX7, A100 - A700, A5000 - A6500 Unique Leak-proof Design of the Sensor Cleaner Bottle • Double Seal prevents leakage and contamination. • Please Note there is a clear removable plastic seal covers the hole enabling drops to be dispensed to the swab You only need ONE drop to apply wet cleaning. DO NOT put too much cleaner on the swab. You don't need to press the bottle too hard to dispense a drop of the cleaner. It will drip naturally and smoothly. Sensor Cleaning Process with UES APSC-16 1. Before start, shoot a piece of white paper with Aperture Priority (A) mode set at f/22 or higher, so you could see where the dust is located on the sensor. 2. You need to set your camera to a sensor clean mode, so the delicate shutter and mirror mechanisms stay out of the way when you clean the sensor. 3. Go to your camera setup, and select 'Lock Mirror Up For Cleaning'. This option will be greyed out unless your camera's battery is fully charged. 4. Use a professional air blower to blow loose dust off the sensor. 5. Dispense 1 drop of the sensor cleaner to the head of the swab. 6. Drag the swab slowly and smoothly from the left of the sensor to the right. Use a single movement. 7. Turn the swab around and drag the clean side of the swab from right to left. Throw this swab away and never reuse a used swab.